EOT Crane Installation And Testing Oversights And Mistakes To Avoid

 

Once your EOT crane is delivered to you by your EOT crane manufacturers, you have the huge responsibility of installing your EOT crane correctly. Your manufacturer will provide you with the installation instructions. It has to be installed as per the manufacturer specifications. Installation and testing oversights could lead to ongoing maintenance issues and safety issues.

Before you could start using your EOT crane, it has to be installed correctly and it has to be tested fully. This is not a process that you would want to speed up or rush through. Every step of the installation and testing should be handled with utmost care by the most seasoned experts in this field. It is better still if your cranes manufacturer sends their technicians to help you with the installation process.

Depending on the type of crane whether it is a single girder crane or a double girder crane, the required support structures should be installed. If there is any masonry work involved with the support structure creation, then enough time should be allowed for curing and setting of the masonry work and cement concrete work. You should have had this requirement completed well in advance so that when the equipment arrives the support structure is ready for use. You will be able to manage this easily with a bit of planning. On the contrary, poor planning could lead to adverse effects on your EOT crane installation process.

Once you have taken care of the support structures required for the EOT cranes, on the day of installation adequate safety measures should be taken. The installation area should be isolated and there should be no human traffic other than the designated personnel. All the installation safety guidelines should be followed strictly as per the manufacturer guidelines.

When the crane installation experts are still around in your facility, you should test your equipment fully to its fullest capacity. This will help you spot the issues with the installation if any and have them resolved immediately. The designated operators should have a complete understanding of how the newly installed EOT works and about the basic maintenance and care.

The first few days after the installation of the EOT crane should be considered the test phase whereby you put the equipment to test in the real working scenario. During this test phase, extra care should be given to safety guidelines. You should be able to observe the complete functioning of the crane and establish that it is safe in every way. Check whether the crane is functioning in the way that it has to function.

You will need the support of a good crane manufacturing company with the installation and the ongoing maintenance and care of the equipment. You may want to screen as many suppliers as you could before selecting your crane manufacturers. There are several manufacturers in the industry. You can find highly experienced experts in this field that are ready to take care of your EOT crane needs.